ArmodTech Shop ArmodTech ↗

THE ARMODTECH WORKBENCH

Small parts.
Clear steps.

A closer look at replacing your hotend.
Short, practical videos. One step at a time.

Start the guide

01 / VIDEO GUIDE

Hotend replacement

A hands-on demonstration on the Bambu Lab toolhead shown in the videos. Check your printer’s model-specific instructions and replacement-part compatibility before starting.

8 stepsApprox. 1½ minutes of videoOriginal workshop footage
Browse steps
01

8 sec / WORKSHOP DEMO

Prepare the toolhead

The opening clip shows the toolhead lever being operated before disassembly. Complete the preparation checks above before following the demonstration.

Open video ↗
02

8 sec / WORKSHOP DEMO

Remove the front cover

Gently remove the toolhead front cover to expose the hotend area.

Open video ↗
03

11 sec / WORKSHOP DEMO

Remove the silicone sock

With the hotend cool, carefully pull off the black silicone sock. Set it aside for reassembly.

Open video ↗
04

13 sec / WORKSHOP DEMO

Release & remove the hotend

Open the hotend retaining mechanism and carefully remove the hotend, as shown. Do not force a part that does not release.

Open video ↗
Watch the alternate angleOpen alternate video ↗
05

19 sec / WORKSHOP DEMO

Fit the replacement hotend

Seat the replacement hotend in position, then close the retaining mechanism. Check that the assembly is securely held.

Open video ↗
06

10 sec / WORKSHOP DEMO

Refit the silicone sock

Slide the silicone sock back over the nozzle area and check that it is properly seated.

Open video ↗
07

8 sec / WORKSHOP DEMO

Replace the front cover

Align the front cover and gently refit it. Check that it sits correctly before proceeding.

Open video ↗
08

11 sec / SCREEN WALKTHROUGH

Match the nozzle settings

After reassembly, restore power and select the nozzle material and diameter that match the part you actually installed. The screen recording shows hardened steel 0.4 mm as an example—not a setting for every nozzle.

Open video ↗

READY FOR YOUR NEXT PRINT

Check. Configure. Create.

Confirm that the hotend and covers are secure, then follow your printer’s recommended checks before printing.

Explore our parts